Mammut Alto Guide High Goretex Hiking Boots

A stable, high-cut and very comfortable mountain hiking shoe with amazingly low weight. It has an all-round protective rubber rand and 3-zone lacing with integrated, patented Base Fit 2.1. This is free sliding on the shoe outer above and below the heel bone using a Mammut Hammer cord, which significantly improves heel support and reduces blistering. The memo foam, elastic GORE-TEX® tongue construction, GORE-TEX® Performance Comfort Footwear membrane and soft heel collar ensure the inside is dry and comfortable. The precise connection to the shaft is due to a light wedge made from poro, PU and TPU, which offers lasting cushioning. The proven Vibram Maton sole completes this visually compelling product.





Features:



- Base Fit 2.1

- Motion Control

- Memo Foam

- FeetMap

- Elastic GORE-TEX®® tongue construction

- 3 Zone Lacing

- Triple Density

- High cut rubber edge

- Board lasted



Ideal For:

- Via Ferrata

- Mountain Hiking

- Backpacking



Suitable For:

- Walking





Specifications:



- Weight: 1560 g

- Velours leather, or suede leather, is obtained by an internal split of the hide/skin. Thanks to its rough surface structure it is highly abrasion resistant and breathable. Depending on the required finish, Velours leather can be waxed, brushed or left untreated.





Technology:



FeetMap:

Lining and padding systemTakes account of the different areas of the footLess perspiration, exposure to cold, pressure



Elastic Gore-Tex Tongue Construction:

No formation of creases in the tongue areaEasier to put on and take off



Triple Density:

Damping element made from three different soft materials. Thus a zone can be designed more softly and another zone more supporting depending upon need.



Memo Foam:

Guarantees an individual fitPads the foot on the instep, shinbone and ankle



Gore-Tex Performance Comfort Footwear:

100% guaranteed waterproofnessGood breathability



Motion Control:

Prevents the foot from bending over outwards thanks to a reinforced inner sideProtects against injuriesEnables lots of flexibility forwards and backwards despite high lateral support



Base Fit 2.1:

Doubled, sliding Mammut® heel strap cordsLines of force run above and below the heel boneImproved heel support and reduced blistering



3 Zone Lacing:

Individual 3-zone lacingPersonalized and adaptable binding



vibram Maton Sole:

Very grippy mountaineering and backpacking sole with medium tread depth Climbing-Zone Easy resoling





Care Instructions:



Shoes must be protected from water, wet conditions and dirt. Since wet conditions and dirt affect leathers natural properties, such as temperature control and comfort, shoe care is a very important area.



Cleaning:

- Use a brush to remove any dirt, or brush the shoe under running water to remove persistent soiling

- Leather cleaning products are not recommended since the soap damages the waterproofing treatment

- After cleaning the shoes, rub in the appropriate wax or silicone-based care products or polish them using a soft brush

- Dry leather needs nutrients in the form of wax (no grease or oil). Apply a very thin layer and then work into the leather

- The application of wax makes nubuk or velours leather appear darker and smoother. Liquid care products maintain the leathers original appearance for longer, but provide fewer nutrients

- The best way to clean the lining (textile, GORE-TEX®® and leather) is using lots of cold water and a sponge. The lining retains high quantities of salt from perspiration. In the long term, these can have a damaging effect on textiles and leather lining materials.



Waterproofing:

- A waterproofing treatment should be applied regularly to footwear. We recommend sprays without fluorcarbone, the surrounding says thank you!

- Waterproofing treatments work best when applied immediately after cleaning, once the shoe is completely dry. To ensure maximum performance, we recommended reapplying a waterproofing treatment the day before a tour.

- Waterproofing is important to keep your feet dry. Leather or textiles saturated with dirt and water are no longer able to breathe, resulting in increased perspiration.

- To achieve optimal resistance to water and dirt, the waterproofing treatment should be applied to clean and dry leather. Clean the shoes first.

- The waterproofing treatment can be applied as soon as the leather is completely dry.

- Spray the shoes thoroughly in a well-ventilated room or in the open air, using slow and even movements, from a distance of around 20 cm.

- Wait until the shoes are completely dry before wearing them. 100 percent protection will be achieved after around 24 hours.



Care:

If leather is not cared for regularly, it becomes hard and brittle and its appearance suffers. Shoe care is important to prevent this. This makes the leather pliant, flexible and keeps it looking good. Regular care also prevents the appearance of small cracks.



- Remove shoelaces and insoles.

- Carefully remove dirt from the shoes using a brush. For persistent soiling, you can also brush the shoes under running water. Do not use any cleaning products. Soap damages leather.

- Stuff cleaned leather shoes with newspaper, and change the newspaper regularly. This helps them to dry faster. (N.B. GORE TEX-lined shoes dry better without any newspaper inside them)

- Wait until the leather is completely dry, before treating them.



Freshening up:

Our feet can be encased in our shoes for up to 16 hours during long hikes, bicycle tours or a long working day. Sweat accumulates in socks and shoes. The comforting warmth of this enclosed damp environment creates the ideal breeding ground for germs. Regular application of freshening products helps to keep the inside of your shoes fresh and clean.



Storage:

If stored properly, a shoe retains its shape and function for a longer period. Never store shoes when they are wet or dirty. This makes the leather brittle.



- After wearing, store shoes with tongues fully open and insoles removed in a shady, dry and well-ventilated area

- Shoe trees should always be placed in dry shoes before storage

- Never store shoes when they are wet, or in poorly ventilated places, such as in a car, a plastic bag or a cellar

- Do not dry near a source of heat (fire, hot stove, etc.)

- Shoes with leather linings can be stuffed with newspaper. Shoes with a GORE-TEX® lining dry faster without any newspaper inside

Do not wait any longer and buy Mammut Alto Guide High Goretex Hiking Boots. For any other information about the characteristics of Mammut Alto Guide High Goretex Hiking Boots, you can get in contact with trekkinn through our contact page. trekkinn offers an exclusive collection of Men´s shoes for outdoor and other leisure activity. Our Men´s shoes will ensure you enjoy your sport and daily activity and make your life more comfortable with our unique range of Boots articles.