Millet Trilogy Goretex Pro Pants

This 3 layer pant is made of Gore-Tex® Pro Astree for a reliable waterproof protection against the hardest conditions. It will provide outstanding resistance and an enhanced breathability perfectly su ited for the keen mountaineer and high mountain activities in vertical settings. Streamlined for light weight and energy efficiency, it features lower gaiters that shave grams without sacrificing weather protection. The bottom legs are reinforced with a tonal colour Cordura® material that protects the hem from the friction of the skis edges. The side zippers run the full length of the pant to allow a quick and easy fit over boots and crampons. Very convenient, the Drop Seat? system allows to take down the pant without removing straps or harness.





Features:



Activities

- Alpinism

- Ski touring

- Adjustable waistband and detachable suspenders

- 2 thigh cargo pockets

- Full-leg side zips and exclusive drop-seat system

Preshaped knees

- Cordura® kick patches and snow gaiters





SPECIFICATIONS:

FABRICS

- Fabrics : GORE-TEX®® PRO ASTREE 3L // Waterproofness 28 000mm - - Breathability RET < 6 m²Pa/W // 100% POLYAMIDE

- Reinforcement : CENTURION? CORDURA® // 70% POLYESTER 30% CORDURA

- WEIGHT: 690 gr





Technology:



- Active Fit: Close fitting all over the body, and sightly tighter in the lower section for greater streamlining and thus higher performance during exertion. Often used with stretch fabrics for enhanced comfort.



- Cordura: Cordura is a must in terms of fabric reinforcement, due to its tight weave. It is highly resistant to wear and tear, abrasion and scuff. Perfect for intense outdoor activities. It is used in large volume bags and packs as well as added reinforcement.



- Goretex: GORE-TEX®® products made garments are durably waterproof, windproof and highly breathable. Highly resistant, it offers maximum comfort and protection.



- Low Impact: LOW IMPACT is a unique standard based on two essential eco-design criteria : eco-friendly material (at least 40% of the product weight must use eco-friendly material), and certifications (at least 80% of the product weight must be BLUESIGN® approved).





Care:



CLOTHING:



- Millet clothing must be machine washed at 30°C, and machine dried using a low-temperature program. To guarantee optimal washing without degrading the product, close up all velcro closures, snap fastenings and zippers, and loosen elastic drawstrings before putting clothing in the machine.



CLOTHING WITH WATERPROOF MATERIALS:



- This is the case particularly for the following materials: Gore-Tex, Polartec Neoshell, Dryedge, Windstopper, Element Shield

- After closing the velcro fastenings, zippers and snap fastenings, wash your product at 30°C with a bit of non-aggressive detergent or a special detergent for waterproof materials. If there is too much detergent left over, run a rinsing program again by itself. Drying should be done in the open air or in a tumble dryer at low temperature.

- It is possible to use a specific product to re-waterproof your product or to give it back water repellency.

Vores Millet Trilogy Goretex Pro Pants er med garanti de originale Millet. Hvis du handler hos udendørs, vil du modtage dine Millet Trilogy Goretex Pro Pants, hjemme hos dig selv, på få dage. Varen er på lager og prisen er kun 0 $. skynd dig at udnytte denne mulighed!