Mammut MTR 141 Base Low Goretex Trail Running Shoes

The innovative Alpine Performer fashioned from impressively tough and abrasion-resistant 3-D polyamide fabric, with integrated hybrid shell for enhanced support and protection. The shoe is very light and comfortable and comes equipped with a range of proven and patented Mammut technologies: Base Fit, Rolling Concept, and the newly developed Mammut gripex Sonar sole technology with its all-round safety and grip concept. The wedge is made from ultra-light injected EVA IP. The GORE-TEX® Extended Comfort footwear membrane offers an optimal foot climate and guaranteed waterproofness. The stretchy GORE-TEX® in the tongue keeps it crease-free and makes for easy entry/exit of the foot. This high-tech shoe also features the technologies Liquid Rubber and 360 Heel Support.





Features:



- Base Fit

- Rolling Concept

- Hybrid Shell

- Sonar Technology

- 360 Heel Support

- Single Shell Construction

- Elastic GORE-TEX®® tongue construction

- Rubber toe cap

- Liquid Rubber Protection

- Cushioning Strobel construction

- Midsole height 8 / 17 mm

- HeelDrop 9 mm



Ideal for:

- Trail Running

- Nordic Walking

- Approach



Suitable for:

- Walking

- Travel

- Biking





Specifications:



- Fabric textile: Mesh Single Shell

- Lining: GORE-TEX®® Extended Comfort Footwear

- Weight: 686 g





Technology:



Footwear technologies are divided into four different sections based on theme:

- Technologies relating to the theme of grip provided by the sole

- Technologies relating to the theme of increased comfort

- Technologies relating to the theme of support

- Sole-specific themes.





Care:



Shoes must be protected from water, wet conditions and dirt. Since wet conditions and dirt affect leathers natural properties, such as temperature control and comfort, shoe care is a very important area.



Cleaning:

- Use a brush to remove any dirt, or brush the shoe under running water to remove persistent soiling

- Leather cleaning products are not recommended since the soap damages the waterproofing treatment

- After cleaning the shoes, rub in the appropriate wax or silicone-based care products or polish them using a soft brush

- Dry leather needs nutrients in the form of wax (no grease or oil). Apply a very thin layer and then work into the leather

- The application of wax makes nubuk or velours leather appear darker and smoother. Liquid care products maintain the leathers original appearance for longer, but provide fewer nutrients

- The best way to clean the lining (textile, GORE-TEX®® and leather) is using lots of cold water and a sponge. The lining retains high quantities of salt from perspiration. In the long term, these can have a damaging effect on textiles and leather lining materials.



Waterproofing:

- A waterproofing treatment should be applied regularly to footwear. We recommend sprays without fluorcarbone, the surrounding says thank you!

- Waterproofing treatments work best when applied immediately after cleaning, once the shoe is completely dry. To ensure maximum performance, we recommended reapplying a waterproofing treatment the day before a tour.

- Waterproofing is important to keep your feet dry. Leather or textiles saturated with dirt and water are no longer able to breathe, resulting in increased perspiration.

- To achieve optimal resistance to water and dirt, the waterproofing treatment should be applied to clean and dry leather. Clean the shoes first.

- The waterproofing treatment can be applied as soon as the leather is completely dry.

- Spray the shoes thoroughly in a well-ventilated room or in the open air, using slow and even movements, from a distance of around 20 cm.

- Wait until the shoes are completely dry before wearing them. 100 percent protection will be achieved after around 24 hours.



Care:

If leather is not cared for regularly, it becomes hard and brittle and its appearance suffers. Shoe care is important to prevent this. This makes the leather pliant, flexible and keeps it looking good. Regular care also prevents the appearance of small cracks.

- Remove shoelaces and insoles.

- Carefully remove dirt from the shoes using a brush. For persistent soiling, you can also brush the shoes under running water. Do not use any cleaning products. Soap damages leather.

- Stuff cleaned leather shoes with newspaper, and change the newspaper regularly. This helps them to dry faster.

- (N.B. GORE TEX-lined shoes dry better without any newspaper inside them)

- Wait until the leather is completely dry, before treating them.



Freshening up:

Our feet can be encased in our shoes for up to 16 hours during long hikes, bicycle tours or a long working day. Sweat accumulates in socks and shoes. The comforting warmth of this enclosed damp environment creates the ideal breeding ground for germs. Regular application of freshening products helps to keep the inside of your shoes fresh and clean.

Storage



If stored properly, a shoe retains its shape and function for a longer period. Never store shoes when they are wet or dirty. This makes the leather brittle.

- After wearing, store shoes with tongues fully open and insoles removed in a shady, dry and well-ventilated area

- Shoe trees should always be placed in dry shoes before storage

- Never store shoes when they are wet, or in poorly ventilated places, such as in a car, a plastic bag or a cellar

- Do not dry near a source of heat (fire, hot stove, etc.)

- Shoes with leather linings can be stuffed with newspaper. Shoes with a GORE-TEX® lining dry faster without any newspaper inside

Want to buy Mammut MTR 141 Base Low Goretex Trail Running Shoes? No further search needed! trekkinn offers a wide variety of exclusive Shoes models. Discover our new Men´s shoes promotions at trekkinn. Made by Mammut, this Shoes product comes in a range of sizes and colours, and comes complete with everything you’ll need.