Montane Spine Jacket

The Montane Spine Pull-On is inspired by the legendary runners of Britain?s most brutal ultra race, the Montane Spine Race. This deep winter endurance event traverses 268 miles (431 km) along Britain?s oldest and most isolated national trail, the Pennine Way. Combining a highly waterproof, breathable and lightweight GORE-TEX®® Active shell with a minimalist run feature set for reduced weight and enhanced packability, the Montane Spine Pull-On offers exceptional performance and comfort without compromise.

The Spine Pull-On follows the key principles of Montane?s VIA Trail Series®, which ensures minimalist design with run-specific tailoring, keeping weight to an absolute minimum without compromising the safety of the user in mountainous environments. The no-nonsense feature set includes: adjustable trail hood with laminated peak, water resistant zipped chest pocket, subtle logo reflective detailing and unique venting fins on the back which are compatible with a Montane race pack. The Pull-On is also highly waterproof (fully taped), breathable, lightweight GORE-TEX®® Active fabric. The Montane Spine Pull-On is race ready and ideal as mandatory kit for when every gram counts.





Features:



- Waterproof

- Breathable

- Packable

- Lightweight

- Minimalist design features

- Vent fins

- Athletic body fit

- Fitted, adjustable trail hood

- Mid-height collar

- External zipped chest pocket

- Pre-elasticated rear waist

- GORE-TEX®® ACTIVE shell



CONSTRUCTION:

- Constructed from very lightweight and breathable 30 Denier GORE-TEX®® ACTIVE SHELL fabric

- 12 13 stitch count per inch on all seams versus a typical industry average of 8, creating a tight, clean and strong seam

- 3mm seam allowance on all seams, reducing weight and bulk under the micro-tape and creating a smooth, strong seam



PATTERNING AND DESIGN:

- Engineered with minimal placement of seams, using darts instead to tailor shape and articulation to reduce weight and bulk

- Tailored specifically to be worn over lightweight and low bulk baselayer or mid layer



HOOD CONFIGURATION:

- Fitted trail hood designed to fit closely over trail headwear

- Adjustable face aperture with internal cord exits

- Rear pre-elasticated volume reduction which expands to fit

- Laminated hood peak for a stable yet supple fit

- Mid-height collar for more protection when needed



VENTS:

- Rear vented ?fins? have been positioned clear of trail pack restriction and offer high levels of weather protection whilst allowing heat and vapour to escape



POCKET CONFIGURATION:

- YKK matte AquaGuard® zipped chest pocket, designed to fit GPS or mobile phone without bounce during movement

- Ergonomic lightweight zip pullers make use easier when wearing gloves



CENTRE FRONT ZIP:

- Deep YKK matte AquaGuard® highly water resistant front zip is two way so it can be unzipped from the bottom for ventilation

- Internal storm flap behind centre front zip for increased weather protection

- Roll over beardguard lined with brushed fine microfleece is comfortable next to the mouth and chin



CUFF AND SLEEVES CONFIGURATION:

- Pre-elasticated cuffs with shaping over the hand to lock out wind and rain



WAIST AND HEM CONSTRUCTION:

- Pre-elasticated rear waist expands to fit whilst allowing a close body fit

- Adjustable hem with cinchable drawcord



FURTHER FEATURES:

- Rear external MONTANE® hang loop

Welcome to our Montane Spine Jacket special deal. At trekkinn, not only can consumers find the best price for their outdoor equipment, but also expert information on outdoor products they are looking to buy. Product prices are up-to-date and all the necessary filters are available, enabling you to compare similar products from top categories like Jackets head-to-head.