Robens Challenger 2P Tent

The Challenger uses our tried and tested side-entry sloping tunnel design to provide stable and comfortable sleeping space with enhanced headroom for two people while minimising pack size and weight. Storage is maximised by offsetting of the inner tent to give extra porch space, and there is also zip access from the inner to an additional storage area at the foot of the tent. Mesh pockets and a gear rope add to storage options.


Features:

- Fire Retardant: The fabric does not burn, but melts when in direct contact with flames.
- 5000 mm: Hydrostatic Head 5000 mm: Shows the amount of water on 1 cm² before the water penetrates the coating.
- Flat pole sleeve: Flat sleeves allow easy pole threading, low profile and wind resistance.
- Taped Seams: Strong, flexible and durable tape is glued and heat-sealed over flysheet seams for effective long-term waterproofing in this critical area.
- Guyline retainer: Guyline retainers hold folded guylines securely when packing away to avoid the nightmare of tangles and knots later.
- Low vents: The Robens Low Vent airflow system allows a healthy airflow through the tent for ventilation. It can be adjusted easily to reflect changing weather conditions.
- Storage pocket for inner door: Storage pockets for inner doors mean they can be stashed away neatly to open up the space and avoid accidental damage.
- Gear rope: Adjustable clothesline to dry cloth and gear.
- Hanging Point System: Toggle and ring fastening.
- Alloy poles: Light, strong, reliable and durable.
- Mosquito net: Mesh with mosquito net for ventilation and to keep insects out.
- 46 x 16 cm: Packsack for stowing with roll down closing.


Specifications:

- Type of tent: Tunnel
- Sleeps people: 2
- Flysheet: HydroTex HD, 75D polyester 185T, 100% polyester. Fire retardant
- Hydrostatic Head: 5000 mm
- Pitching way: Flysheet first or as one
- Inner tent: 68D polyester 190T, 100% polyester, breathable
- Rooms: 1 bedroom, 1 porch area
- Floor: 75D polyester Taffeta 210T, 100% polyester, 10000 mm
- Poles: Alloy #7001, T6, 8.5 mm, anodised
- Pack size: 46 x 16 cm
- Minimum weight: 2.2 kg
- Weight: 2.5 kg


Technology:

HydroTex® HD:
- HydroTex® HD is a fabric again made exclusively for Robens to address our uncompromising need for a light, strong, durable flysheet material. Seams are fully taped for a durable waterproof seal, the tough 75 denier high density polyester has a polyurethane

Robens Wind Test:
- The determination of the performance of a Robens tent in wind is based on the knowledge and technique available to Robens at the time of testing. During the test we register the maximum (MAX) speed impact a tent was subjected and the average (AVG) wind speed at which structural instability occurred. This may appear as a broken/deformed pole, or the collapse of the tent and subsequent return to shape when the wind drops. At no point was any form of catastrophic failure experienced up to the maximum wind speed.

Are you going to buy Robens Challenger 2P Tent? All the products from Robens have the best quality so that you can enjoy your activities without any complications. Place your order of Robens Challenger 2P Tent and receive it in a few days. Our aim at trekkinn is to make good deals accessible to all. We have a large offering of outdoor equipment and life style items that is unique.